NEW! Metal detector Fortune 7x4 LCD display, FM transmitter, waterproof coil

Fortune PRO-2 FM Metal Detector Increased Detection Depth GR2018 Enclosure - 2020 New! The Fortune PRO-2 metal detector is a professional metal detector, which was the last device from the Fortune metal detector range.

It contains all the best functions of Fortuna PRO and Fortune M3 devices, which made it even faster and more ergonomic. The main differences between the Fortune PRO-2 metal detector in the GR2018 package and its predecessor. More compact device: thanks to the GR2018 case, it became possible to remove the battery pack. Now the batteries are in the case and they can easily be removed to charge. With Advanced Operational Amplifiers, the depth of detection has increased.

The power button is located on the control unit. The main differences between the Fortune PRO-2 metal detector in the GR2018 case and other Fortune models. Thanks to the use of two processors and software optimization, the device has become much faster than its predecessors. Speed and separation increase the tenacity of finds. Fortune PRO-2 does not need a sensor balancing module. The residual imbalance of the sensor up to 4.3V does not affect the operation of the device. Additionally, the "Analog Search" mode has been introduced. Now you can connect dual-frequency coils. A dual frequency coil comes with a metal detector.

An FM modulator is used for use with FM headphones. Unlike MD Fortuna-Pro, an LCD display with white backlight is used, which is convenient when working in the sun. Fortune PRO-2 in the GR2018 case is quite simple to operate, and at the same time a rather flexible device, in terms of working on any soil it will be very convenient, automatic ground offsets are fast and accurate, however, the display also constantly displays the signal from the ground in the form marker, as well as the number of phases of the soil is displayed constantly. Now it is clearly visible that the soil, for example, has changed and in which direction it should be moved manually, or rebalanced automatically, if necessary. The speed of work is impressive, as is the separation.

The speed of this device allows you to search in rather weedy places, distinguishing and discriminating against unwanted targets. And the high sensitivity of the device will allow you to successfully search even on a knocked out area. Metal discrimination - VDI numerical and bar-charting, as for more expensive devices, for example MINELAB, FISHER, XP Metal Detectors, GARRETT (different objects and metal alloys have their own digital value). The device is multi-frequency, with it you can use different coils with different frequencies, as well as dual-frequency coils. The ability to mask, exclude unwanted metal from the search.

Discrimination visual indication: VDI (VDI) number, synograph, dynamic signal strength scale. Voice of the target: 90-tone, 4-tone, two-tone, volume control. Added "Beach" mode to search for fine gold. FM transmitter, for connecting wireless headphones.

Signal processing speed: very high. There is no need for a sensor balancing module. Masks The ability to mask unwanted metal. Tuning the device to the frequency of the existing sensor.

Frequency of the device: 4-20 kHz. Number of profiles for sensors: Four profiles for different search sensors and an additional 2 profiles for dual frequency. DD 25 sensor two-frequency (included 10.3 / 14.75 kHz). GR2018 case: 140 × 100 × 30 mm.

GR2018 is a thin instrument case made of impact-resistant heat-resistant ABS plastic UL-94V0. Provides protection against dust and moisture according to IP65. The main parameters of this assembly. 2200 Li-ion battery (real capacity) mAh 3.7V.

Collapsible, adjustable rod, the lower part is impact-resistant plastic, the upper part is high-strength aluminum, coated with factory powder paint. High-quality board, factory-made, double-sided, with a protective mask and plating holes.

In a complete set, the unit is powered by 3.7 V (lithium battery 18650 by 2200 mAh). If the power will be made its own, then it is possible from 2 to 9 V. The pinout of the sensor connector is as follows. Sensor frequency: 10.3 / 14.75 kHz (default).

Spacing between TX-RX: 2 kHz. Detection range of the Fortune PRO-2 / Fortune PRO-2 metal detector in the air.

DD 25 / current 150 mA / frequency spacing 2 kHz / sens 3 / Gain 200%. Average detection range by air = 32-50 cm per coin. Large metal objects up to 150-200 cm. FonScan mode, allows you to search for deep-lying objects (Similar to the PB-CT function). The "Shift VDI" mode allows you to stretch low-conductive targets, such as fine gold and metal.

Added "Beach" mode to search for small gold. Discrimination mode / all metals. Adjustment of the signal gain from 0% to 100% (input operational amplifier).

Sound signal of overload and display. The ability to set the current in TX.

Ability to use dual-frequency sensors. The ability to adjust the bar. Functional block of the device. Quality, reliability, good depth indicators, ease of use!

If you do not want to wait and want to receive the goods as soon as possible. (The tariff may differ from the dimensions, weight of the parcel). Metal detector Fortune 7x4 LCD display, FM transmitter, waterproof coil" is in sale since Saturday, May 16, 2020. This item is in the category "Business & Industrial\Test, Measurement & Inspection\Test Meters & Detectors\Metal Detectors". The seller is "miroshnichenkometall_1" and is located in Kharkiv.

This item can be shipped worldwide.

Model: PRO-2
Modified Item: No
Country/Region of Manufacture: Ukraine
Custom Bundle: No
Type: Handheld
Features: Discrimination Knob
MPN: Does Not Apply
Brand: Fortune
Intended Use: General Purpose